- pipe bending machines
HPB
6-20
HPBP
6-20 Primus
HPB
16-30
HPB
22-36
HPB
32-42
• CAT C4.4
80hp @2400rpm
• 35gal hydraulic tank,
30gal fill capacity
• CAT C4.4 Turbo Deisel
109hp @2200rpm
• 91gal hydraulic tank,
82gal fill capacity
• CAT C4.4 Turbo
109hp @2200rpm
• 100gal hydraulic tank,
80gal fill capacity
• CAT C6.6 Turbo Diesel
173hp @2200rpm
• 120gal hydraulic tank,
100gal fill capacity
• CAT C6.6 Turbo Diesel
202hp @2200rpm
• 200gal hydraulic tank,
180gal fill capacity
- pipe bending mandrels
PWM 6-8
PWM 10-12
PWM 14-16
PWM 16 Short
PWM 18-20
PWM 16-22
PWM 16 Long
PWM 18-20 Long
PWM 24-32
PWM 34-42
- line-up clamps
IPC 6
IPC 8
IPC 10
IPC 12-14
IPC 16-18
IPC 20-22
IPC 24-26
IPC 28-30
IPC 30-32
IPC 34-36
IPC 36-38
IPC 40-42
IPC 46-48
Darby Air Compressor
- roller cradles
PRC 6-12S
PRC 12-24S
PRC 24-36S
PRC 36-48S
PRC 48-60S
PRC 6-12D
PRC 12-24D
PRC 24-36D
PRC 36-48D
PRC 48-60D
PRC 02-08
- pipeline supplies
- pipe facing machines
PFM 8-14
PFM 12-26
PFM 24-48
Darby Power Unit
- accubend
For a printable version, click hereFEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
Filters, lubricators, regulators and valves all rated to 250psi Fully hardened dowel pins Nose cone made of seamless 4130 steel for durability 3 Section Clamp - No frame - Nose cone only Three section, self-centering clamp has an extra clamping section to assure proper line-up in the pipe to avoid lost time for high-low adjustments. *Standard in sizes 10" through 14" Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies Air tubes are electro statically plated to reduce corrosion Spring mounted air tank Remote operated by reach rod Most clamps can cover two pipe sizes through the use of conversion kits
Technical Specifications:
Pipe Size Range 12"-14" (305-356mm) Wall Thickness Range .125"-.500" (3.18-12.7mm) on 12"(305mm)
.125"-.750" (3.18-19.05mm) on 14"(356mm)Standard Length 65" (1651mm) Width 11" (279mm) Height 11" (279mm) Weight 270 lbs (123 kg) Working Air Pressure 180-220 psi Air Motor Non Powered Air Tank 2 gal Clamping Shoes 15 total clamp shoes , 12 shoes at the joint (6 on each section) 3 shoes on rear section Cylinder 6" (152mm) Climbing Capacity N/A