- pipe bending machines
HPB
6-20
HPBP
6-20 Primus
HPB
16-30
HPB
22-36
HPB
32-42
• CAT C4.4
80hp @2400rpm
• 35gal hydraulic tank,
30gal fill capacity
• CAT C4.4 Turbo Deisel
109hp @2200rpm
• 91gal hydraulic tank,
82gal fill capacity
• CAT C4.4 Turbo
109hp @2200rpm
• 100gal hydraulic tank,
80gal fill capacity
• CAT C6.6 Turbo Diesel
173hp @2200rpm
• 120gal hydraulic tank,
100gal fill capacity
• CAT C6.6 Turbo Diesel
202hp @2200rpm
• 200gal hydraulic tank,
180gal fill capacity
- pipe bending mandrels
PWM 6-8
PWM 10-12
PWM 14-16
PWM 16 Short
PWM 18-20
PWM 16-22
PWM 16 Long
PWM 18-20 Long
PWM 24-32
PWM 34-42
- line-up clamps
IPC 6
IPC 8
IPC 10
IPC 12-14
IPC 16-18
IPC 20-22
IPC 24-26
IPC 28-30
IPC 30-32
IPC 34-36
IPC 36-38
IPC 40-42
IPC 46-48
Darby Air Compressor
- roller cradles
PRC 6-12S
PRC 12-24S
PRC 24-36S
PRC 36-48S
PRC 48-60S
PRC 6-12D
PRC 12-24D
PRC 24-36D
PRC 36-48D
PRC 48-60D
PRC 02-08
- pipeline supplies
- pipe facing machines
PFM 8-14
PFM 12-26
PFM 24-48
Darby Power Unit
- accubend
For a printable version, click hereFEATURES AND TECHNICAL SPECIFICATIONS
Features/Advantages:
Filters, lubricators, regulators and valves all rated to 250psi Fully hardened dowel pins Nose cone made of seamless 4130 steel for durability Clamp frame is built using 2"x 3/8" angle iron and 1 1/4" X 1/4" WT square tubing to create a strong, durable frame Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies Darby uses only the highest quality high pressure quick exhausts Air tubes are electro statically plated to reduce corrosion Two Stage Stainless Steel Air Tank: Rigid mounted air tank for 40' joints; Large trailer tank for 60' and 80' joints available Remote operated by reach rod Most clamps can cover two pipe sizes through the use of conversion kits All powered clamps have a 25 degree climbing capability Powered line travel on models 16" to 60 " for easy operational mobility through the pipe
Technical Specifications:
Pipe Size Range 20"-22" (508-559mm) Wall Thickness Range .125"-.500" (3.18-12.7mm) on 20"(508mm)
.125"-.750" (3.175-19.05mm) on 22"(559mm)Standard Length 114" (2896mm) Width 18" (457mm) Height 18" (457mm) Weight 810 lbs (367 kg) Working Air Pressure 180-220 psi Air Motor .9 hp Cleco Air Tank 15 gal w/ 3 gal reserve Clamping Shoes 20 total clamp shoes, 10 on each section Cylinder 8" (203mm) Climbing Capacity 25 degree + slope