For a printable version, click here

FEATURES AND TECHNICAL SPECIFICATIONS

Features/Advantages:

	Filters, lubricators, regulators and valves all rated to 250psi
	Fully hardened dowel pins
	Nose cone made of seamless 4130 steel for durability
	Clamp frame is built using 2"x 3/8" angle iron and 1 1/4" X 1/4" WT square tubing to create a strong, durable frame
	Darby uses grade 8 bolts and the highest quality seals and u-cups in our assemblies
	Darby uses only the highest quality high pressure quick exhausts
	Air tubes are electro statically plated to reduce corrosion
	Ridgid Mounted Two Stage Stainless Steel Air Tank
	Remote operated by reach rod
	Most clamps can cover two pipe sizes through the use of conversion kits
	All powered clamps have a 25 degree climbing capability
	Powered line travel on models 16" to 60" for easy operational mobility through the pipe

Technical Specifications:

Pipe Size Range	24"-26" (610-660mm)
Wall Thickness Range	.125"-.500" (3.175-12.7mm) on 24"(610mm) .125"-.750" (3.175-19.05mm) on 26"(660.4mm)
Standard Length	121" (3073mm)
Width	21" (533.4mm)
Height	21" (533.4mm)
Weight	1035 lbs (470 kg)
Working Air Pressure	180-220 psi
Air Motor	1.9 hp Cleco
Air Tank	30 gal w/ 3 gal reserve
Clamping Shoes	24 total clamp shoes, 12 on each section
Cylinder	10" (254mm)
Climbing Capacity	25 degree + slope